Visit my blog for free daily Cisco CCNA and CCNP certification questions, my latest free articles and tutorials, and more!
CCNA And CCNP Practice Exam And Training Video:
OSPF Area Types, Network Commands, And More!
Chris Bryant, CCIE #12933
In this new CCNA and CCNP Video Practice Exam, I'll first give you five practice exam questions on OSPF - and then show you the answers on live Cisco routers!
The questions and answers are also in written form on this page - you'll find those below the video. If you want a sneak peek at the questions before taking the video exam, here's your chance!
.. And I Guarantee You Can Watch The 20+ Hours Of Videos Until You Pass!
(I'll even throw in my CCNA Study Guide ebook!)
"You are the reason I'm a CCNA today!" - Paul Laudenslager
The questions ....
1. What exact command will place a loopback interface with the IP address 1.1.1.1 into Area 5 - and literally cannot put any other interface into that area?
2. What OSPF router type is defined as "a router whose interfaces are all in the same area?
A. Internal
B. ABR
C. ASBR
D. Backbone
3. What is the default priority of an interface in an OSPF segment?
4. In the command "router ospf 1", what exactly does the number 1 refer to?
A. The AS
B. The process number
C. The domain number
D. The area number
The answers...
1. In the OSPF config, use the command network 1.1.1.1 0.0.0.0 area 5.
2. "A". An OSPF router with all interfaces in one area is an internal router.
3. The default priority of an OSPF interface is 1.
4. "B". That number is the OSPF process number. It is locally significant and does not have to match any process number on a potential neighbor.
Be sure to visit these pages and keep sharpening your skills for CCNA exam success!
