Get My Exclusive FREE 7-Part Report,
"How To Pass The CCNA", Daily FREE
Cisco And CompTIA Exam Questions,
And All The Latest Certification News
In My Daily Newsletter!

Privacy Policy

Name:
Email:
  More Testimonials >
Visit my blog for free daily Cisco CCNA and CCNP certification questions, my latest free articles and tutorials, and more!


 

CCNP Certification / BCMSN Exam Training:

Multicasting And The RPF Check

By Chris Bryant, CCIE #12933

Multicasting is a vital topic on your BCMSN, CCNP, and CCIE exams, and it can also be very confusing when you first start studying it. Multicasting uses concepts that are unlike anything you've run into in your routing protocol studies, and that can throw you at first. I speak from experience that multicasting is like any other Cisco technology - learn the basics, master the fundamentals, and then build your skills on that foundation.

One such fundamental is the RPF Check, or Reverse Path Forwarding Check.

A fundamental difference between unicasting and multicasting is that a unicast is routed by sending it toward the destination, while a multicast is routed by sending it away from its source.

"toward the destination" and "away from its source" sound like the same thing, but they're not. A unicast is going to follow a single path from source to destination. The only factor the routers care about is the destination IP address - the source IP address isn't a factor.

With multicast routing, the destination is a multicast IP group address. It's the multicast router's job to decide which paths will lead back to the source (upstream) and which paths are downstream from the source. Reverse Path Forwarding refers to the router's behavior of sending multicast packets away from the source rather than toward a specific destination.

The RPF Check is run against any incoming multicast packet. The multicast router examines the interface that the packet arrived on. If the packet comes in on an upstream interface - that is, an interface found on the reverse path that leads back to the source - the packet passes the check and will be forwarded. If the packet comes in on any other interface, the packet is dropped.

The RPF Check serves to verify the integrity of your multicasting network, and also serves as a reminder that the basic operation of multicasting is a lot different than unicasting!

To your success,

Chris Bryant

CCIE #12933

chris@thebryantadvantage.com

 

 

The Ultimate CCNA Study Package | The Ultimate CCNA Study Guide

Binary Math And Subnetting Mastery

Cisco Rack Rentals

CCNP BSCI Exam Study Package

CCNP BCMSN Exam Study Package

CCNP BCRAN Exam Study Package

CCNP CIT Exam Study Package | CCNP BSCI Exam Study Guide

CCNA CBT Video Boot Camp | CCNP BSCI Video Boot Camp

Cisco Training Tutorials And Cisco Certification Articles

CCNP CBT BCMSN Video Boot Camp | CCNP CBT BCRAN Video Boot Camp

CompTIA Network+ Exam Study Package

CompTIA Security+ Exam Study Package

CompTIA A + Certification Exam Study Package

CCNA Training Store | CCNP Certification Training Store

CompTIA Certification Training Store

Cisco Lab Router And Switch Home Lab Help

Site Map | Home Page | Testimonials

Microsoft Windows Vista Certification Updates And News

The Bryant Advantage Blog | About Chris Bryant, CCIE #12933