CCNP SWITCH Practice Exam:
Advanced Switching Commands For The 642-813 Test
Here's a new CCNP SWITCH practice exam for you on advanced switch commands. Answers can be found at the bottom of the page.
For plenty of additional CCNP SWITCH exam tutorials, videos, and practice exams, just click that link!
Enjoy the questions!
Chris Bryant
CCIE #12999
"The Computer Certification Bulldog"
chris@thebryantadvantage.com
____________________________________________________
I'm Paying It Forward Bigger Than Before...
The CCNP SWITCH Exam Study Package Is Now $25!

" Your books are the best! The best money I have spent on CCNP training material!" -- Rob Pethick, CCNP
____________________________________________________
CCNP SWITCH Practice Exam Questions:
Question 1:
What is the full command that will disable a Cisco switch port's ability to transmit DTP frames?
Question 2:
What is the main purpose of IEEE 802.3ac as it related to trunking?
Question 3:
Which of the following are true of PaGP?
A. Uses dynamic and auto modes
B. Is Cisco-proprietary
C. Uses active and passive modes
D. is an industry-standard protocol
Question 4:
A switch port has just received a dynamic VLAN membership. What other port feature will be enabled as a result?
A. Uplinkfast
B. Portfast
C. Backbonefast
D. Port Security
E. Dot1x port-based authentication
Question 5:
How do access ports handle encapsulation and tagging?
A. The treat all VLANs as native except VLAN 1.
B. They don't do either one.
C. They use dot1q by default.
D. They use ISL by default.
Question 6:
Which of the following must ports agree upon to be placed into the same Etherchannel?
A. port speed
B. trunking mode
C. native VLAN
D. allowed VLANs
E. port duplex
Answers right after this brief and important message!
The Only CCNP SWITCH Exam DVD From "The Computer Certification Bulldog" -- Chris Bryant, CCIE #12933.
 
And now.... the answers!
1. switchport nonegotiate.
2. The IEEE 802.3ac standard allows the maximum frame length to be extended to 1522 bytes, which means the dot1q 4-byte header doesn't cause transmission issues.
3. "A, B". PaGP is a Cisco-proprietary Etherchannel negotiating protocol, and runs in dynamic or auto mode.
4. "B". Portfast will be autoenabled on such a port.
5. "B". Access ports do not tag frames or encapsulate them via dot1q or ISL - trunk ports do that.
6. "A, B, C, D, E". Ports have to agree on all of those values to be placed into the same Etherchannel.
For plenty of additional CCNP SWITCH practice exams, tutorials, and videos, just click that link for our CCNP SWITCH Exam Resource Center!
The Only CCNP SWITCH Exam DVD From "The Computer Certification Bulldog" -- Chris Bryant, CCIE #12933.
 
The Ultimate CCNA Study Package | The Ultimate CCNA Study Guide
Binary Math And Subnetting Mastery
Cisco Rack Rentals
CCNP BSCI Exam Study Package
CCNP BCMSN Exam Study Package
CCNP BCRAN Exam Study Package
CCNP CIT Exam Study Package | CCNP BSCI Exam Study Guide
CCNA CBT Video Boot Camp | CCNP BSCI Video Boot Camp
Cisco Training Tutorials And Cisco Certification Articles
CCNP CBT BCMSN Video Boot Camp | CCNP CBT BCRAN Video Boot Camp
CompTIA Network+ Exam Study Package
CompTIA Security+ Exam Study Package
CompTIA A + Certification Exam Study Package
CCNA Training Store | CCNP Certification Training Store
CompTIA Certification Training Store
Cisco Lab Router And Switch Home Lab Help
Site Map | Home Page | Testimonials
Microsoft Windows Vista Certification Updates And News
The Bryant Advantage Blog | About Chris Bryant, CCIE #12933
|