CCNP ROUTE 640-902 Flash Card Practice Exam Route Redistribution




	More Testimonials >

Visit my blog for free daily Cisco CCNA and CCNP certification questions, my latest free articles and tutorials, and more!

CCNP ROUTE And TSHOOT Practice Exam:

Route Redistribution

Route redistribution is a huge part of your CCNP ROUTE studies -- and whether it's on the TSHOOT exam or in real life, you're going to have to t-shoot redistribution sooner or later.

And yes, that is the voice of experience speaking! : )

To make sure you're ready for CCNP exam success, I'm presenting these questions to you in "Flash Card" format - no choices!

The answers are at the bottom of the page, along with links to three hours of free CCNP Video Boot Camp training.

Let's get started!

1. Of RIP, EIGRP, and OSPF, do any of these perform any kind of automatic route redistribution?

2. Of those same protocols, which require the network admin to specify a seed metric for redistribution?

3. Identify the default seed metric of those protocols that do NOT require one to be set.

4. Name two different ways you can introduce a seed metric to redistribution involving EIGRP.

Answers right after this brief, important message!

_______________________________________________

Over 8,000 students are now in my Video Boot Camps - and we're celebrating by offering 60% off ALL my courses on Udemy!

Just follow these links for full course descriptions and samples - your discount code BULLDOG60 has already been applied!

CCNA Video Boot Camp - Just $44!

CCNA Security 640-554 Video Boot Camp - $39!

CCNP ROUTE Video Boot Camp - $44

CCNP SWITCH Video Boot Camp - $44

CCNP TSHOOT Video Boot Camp - $44

CCNP All-in-One Course -- All 3 CCNP courses, just $99!

__________________________________________________________

And now.. the answers!

1. EIGRP actually performs automatic redistribution under some odd circumstances, but OSPF and RIP do not under any circumstances.

2. When redistributing routes into RIP and EIGRP, you have to supply the seed metric. You don't have to with OSPF ...

3. ... since OSPF has a default metric of 20.

4. You can introduce a seed metric in EIGRP at the end of the redistribute command....

BRYANT_ADV_1(config)#router eigrp 100
BRYANT_ADV_1(config-router)#redistribute rip ?
metric Metric for redistributed routes
route-map Route map reference
<cr>

BRYANT_ADV_1(config-router)#redistribute rip metric ?
<1-4294967295> Bandwidth metric in Kbits per second